Toxic Gas Monitor
The EL toxic gas monitor series brings the accuracy and selectivity of electrochemical-cell sensor technology to the Acme toxic gas monitor line. Available for a wide range of hazardous and toxic gases, the EL toxic gas monitor series can be ordered with a 4-20 mA proportional output signal, and/or up to four relay contacts for fan control and alarm. Available enclosures include NEMA 3R, 4/12 and 4X, with an available panel heater.
For CO/CO2 (Diesel Fumes): remote sensor stations must be mounted vertically according to the arrow on the sensor. Heights between 4 ft. (1.20 m) and 6 ft.(1.80 m) are usual. Locations where a parked vehicle may exhaust directly into the toxic gas monitor should be avoided. Where the toxic gas monitor is mounted on a column, the preferred side should be outside the usual lane of traffic.
